Outdoor travel is a way of relaxation that we often choose, so the camping tent may be the largest and heaviest of the guys that need to be carried when going out. So in the process of carrying it may be a little bulky and a little cumbersome. So before going out, we must first have a more comprehensive understanding of camping tents.
The composition of the camping tent:
Fabric:
(1) The technical indicators of waterproof fabrics are subject to the degree of waterproofing
Water repellent is only coated with AC or PU. Generally only used for children or game accounts
Waterproof 300MM is generally used for beach tents/shade tents or cotton tents for drought and less rain
Waterproof 800MM-1200MM for conventional simple camping tents
Waterproof 1500MM-2000MM is used to compare mid-range tents, which need to travel for many days.
Waterproof above 3000MM is generally a professional tent, which has been treated with technologies such as high temperature resistance/cold resistance.
Bottom material: PE is generally the most common, and the quality mainly depends on its thickness and warp and weft density. It is better to use high-grade Oxford fabrics, and the waterproof treatment should be at least 1500MM or more.
The inner fabric is generally breathable nylon or breathable cotton. The quality depends mainly on its density.
(2) Support skeleton
The most common are fiberglass tubes.
Measuring its quality is more professional and more important.

There are several types of tent brackets
1 Elasticity: This type is generally a children's account or a beach game account
2 The most common is the fiberglass tube has a series of 6.9/7.9/8.5/9.5/11/12.5. The thicker the rigidity, the weaker the softness. Therefore, whether the selection of the fiber tube support is reasonable is determined according to the ratio of the size and height of the ground, and it is easy to break if it is too thick or too thin.
3 Aluminum alloy skeleton: It is relatively high-grade, and it is difficult to test according to the alloy ratio. Generally, the overall radian curve of the original bracket is calculated first and then hot-pressed. The feature is that it is light and easy to carry, but it is not easy to fold, but the quality is not good and it is easy to bend and deform.