(1) When the advertising tent is folded, the activity heightening feet on the same side should be folded at the same time, and the same is true for the activity heightening feet on the other side; At the same time, buckle the safety buckle on the same side, so that the entire tent is retracted. This is the entire process of retracting the tent. After mastering the operation, even one person can retract the tent within one minute. It's done! I don't know if you have a look that looks difficult, but it's not difficult to operate!
(2) After positioning the mobile position close to the safety buckle, two people push the mobile positioning force through the safety buckle at the same time on the same side, and the same is true on the other side.
(3) The feet on both sides hold two people and pull it apart at the same time, so that the event display tent can be easily pulled open.
(4) After the mobile display tent is opened, because the mobile display tent is too large, it cannot be pulled down by hand. At this time, we manipulate and customize the outdoor advertisement of the advertising tent. At the same time, people retreat with the expansion of the mobile display tent, until the mobile positioning is close to the canopy safety buckle.
(5) There are two height-adjusting holes on the foot column, which can adjust the required height at will. When the foot column is increased, the two unified sides are pulled out of the increased foot column, and the other side should also be manipulated at the same time.
sxgaobu.com
English
Español
عربى
Português
